When Adaptive Front Lighting Control Unit Is Replaced (A Brand New Adaptive Front Lighting Control Unit Is Installed)
NOTE:
If the AFS indicator is blinking, check the DTCs.
- Remove all of the baggage from the vehicle.
- Turn the ignition switch to ON (II).
- Make sure the AFS indicator does not turn off. (If the AFS indicator turns off, the adaptive front lighting control unit is not a new or previously learned unit.)
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Within 5 seconds, turn the headlight switch ON/OFF or to passing three times.
- Make sure the AFS indicator blinks in a 1 second cycle. (If the indicator does not blink, return to step 2).
- Turn the headlights ON, and make sure the headlights move while the AFS control unit runs the initialization function (see SYSTEM DESCRIPTION ).
- Turn the steering wheel 90 degrees or more from the center position to left and right position.
- Test-drive, with only the driver in the vehicle, in a straight line for 98.4 feet (30 m) at 16 mph (25 km/h) or more.
- Make sure the AFS indicator turns off. (If the indicator does not turn off, repeat steps 8 and 9).
- Adjust the headlights (see HEADLIGHT ADJUSTMENT ).