Interface Dial Inputs and Outputs

Fig 1: Identifying Interface Dial 5P Connector

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Interface Dial 5P Connector

INTERFACE DIAL 5P CONNECTOR REFERENCE

Terminal Number

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

WHT

JOG (jog)

Interface dial operation signal

0-5 V pulses

If open: You can not operate navigation system.
If short to ground: You can not operate navigation system.

GRY⁽¹⁾

SH JOG (Shield jog)

Shield for interface dial signal

BLK

GND (Ground) (G506)

Ground for interface dial

0 V

If open: You can not operate navigation system.
If short to ground: No effect on navigation system operate.

PUR

ACC (Accessory)

Power source for interface dial

Battery voltage at ACC (I)

If open: You can not operate navigation system.
If short to ground: Blows fuse No. 32 (10 A) in the driver's under-dash fuse/relay box.

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire.

The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.