DTC B1601: Keyless Access Control Unit Internal (CPU) Error DTC B1602: Keyless Access Control Unit Internal (EEPROM) Error
- Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
- Wait for at least 10 seconds to clear the DTCs.
- Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
- Touch the door outer handle switch to lock the door.
- Touch the door outer handle switch to unlock the door.
- Connect the HDS to the data link connector.
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for DTCs with the HDS.
Is DTC B1601 and/or B1602 indicated?
YES -Replace the keyless access control unit.
NO -Intermittent failure, the system is OK at this time.