CMBS OFF Switch Test/Replacement

Remove the instrument fascia (see INSTRUMENT FASCIA REMOVAL/INSTALLATION ).
Remove the screws and the multi-switch (A).

Fig 1: Identifying Multi-Switch With Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each CMBS OFF switch position according to the table below.

Fig 2: Identifying CMBS OFF Switch Terminals Continuity Reference Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Identifying CMBS OFF Switch 6P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the switch.