Interface Dial Inputs and Outputs
INTERFACE DIAL 5P CONNECTOR TERMINAL REFERENCE
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | BLU | JOG (jog) | Interface dial operation signal | 0-5 V pulses | If open You can not operate the navigation system If short to ground You can not operate the navigation system | ||
| 2 | GRY(1) | JOG SH (Shield jog) | Shield for interface dial signal | -- | -- | ||
| 3 | BLK | GND (Ground) | Ground for interface dial | 0V | If open You can not operate the navigation system If short to ground You can not operate the navigation system |
||
| 4 | PUR | ACC (Accessory) | Power source for interface dial | Battery voltage at ACC mode | If open You can not operate the navigation system If short to ground Blows fuse No 18 (7 5 A) in the driver's under-dash fuse/relay box |
||
The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram |
|||||||