October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Start/Stop Switch Test/Replacement
- Remove the driver's center trim (see DASHBOARD CENTER TRIM REMOVAL/INSTALLATION
).
- Disconnect the 10P connector (A) from the engine start/stop switch (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two screws, and the engine start/stop switch.
- Check for continuity between the terminals in each switch position according to the table.
NOTE:
Make sure the correct test lead (+ or -) is placed on the terminal.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the switch in the reverse order of removal.