Ignition Key Light Test

NOTE: SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.

Remove the steering column upper and lower covers (see COLUMN COVER REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A).

Fig 1: Identifying 6P Connector And LED
Courtesy of AMERICAN HONDA MOTOR CO., INC.
The LED (B) should come on when power is connected to the terminal No. 6 and ground is connected to terminal No. 5.
If the LED does not come on, replace the steering lock assembly (see STEERING LOCK REPLACEMENT ).