LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> MAF Sensor/IAT Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

MAF Sensor/IAT Sensor Replacement

  1. Disconnect the MAF sensor/IAT senor 5P connector (A).
    Fig 1: MAF Sensor/IAT Sensor And Connector, Screws And O-Ring With Torque Specifications
    G08069577Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the screws (B).
  3. Remove the MAF sensor/IAT sensor (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals