When Replacing the Remote Slot Control Unit/Keyless Access Control Unit/PCM/Driver's MICU or Registration of the Remote(s)
- When the replacing keyless access control unit, insert the remote into the remote slot.
- Connect the HDS to the data link connector (DLC).
- When the all remotes are lost, select the ON mode according to the instructions on the HDS screen, then go to step 5.
- Press the engine start/stop button to select the ON mode.
- Select the ONE-PUSH START from the SYSTEM SELECTION MENU, then enter REGISTRATION mode.
- Select the appropriate unit or the KEYS, and do the registration according to the instructions on the HDS screen.
- Press the engine start/stop button to select the OFF mode, and verify systems work normally with all remotes.