Audio-Navigation Unit Connector G (8P)

Fig 1: Identifying Audio-Navigation Unit Connector G (8P) Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

AUDIO-NAVIGATION UNIT CONNECTOR G (8P)

Terminal Number

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

BRN

C-SIG (Composite signal)

Composite video (vertical/ horizontal) Synchronizing signal

0.2 V AC average in RGB color diagnostic mode

If open: Picture rolls horizontally, colors still visible.
If short to ground: Picture rolls horizontally, colors still visible.

WHT

G-SIG (Green signal)

Green color signal

0.7 V AC average in RGB color diagnostic mode

If open: Green color missing (see RGB color diagnosis).
If short to ground: Green color missing (see RGB color diagnosis).

BLU

RGBC GND (Ground signal)

Ground for color signal

0 V

If open: No change to display. If short to ground: No effect on system.

GRY⁽¹⁾

RGBC SH (Shield signal)

Shield for terminals No. 2, No. 3, No. 4, No. 7, and No. 8

0 V

If open/short to ground: No effect on system.

YEL

B-SIG (Blue signal)

Blue color signal

0.7 V AC average in RGB color diagnosis

If open: Blue color missing (see RGB color diagnosis).
If short to ground: Blue color missing (see RGB color diagnosis).

GRN

R-SIG (Red signal)

Red color signal

0.7 V AC average in RGB color diagnosis

If open: Red color missing (see RGB color diagnosis).
If short to ground: Red color missing (see RGB color diagnosis).

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the circuit diagram.