DTC P062F: PCM Internal Control Module Keep Alive Memory (KAM) Error (2013-15)

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2013-15), or How to Troubleshoot the A/T System (2013-15) .

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) Error

DTC (PGM-FI)

Problem verification:

- 1. Press the engine start/stop button to select the ON mode.

- 2. Clear the DTC with the HDS - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2013-15), or How to Troubleshoot the A/T System (2013-15) .

Clear DTC

- 3. Check for Pending or Confirmed DTCs with the HDS.

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) Error

Is DTC P062F indicated?

YES

The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM , then do the repair verification.

Intermittent failure, the system is OK at this time.

Repair verification:

Check for Pending or Confirmed DTCs with the HDS.

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) Error

DTC (PGM-FI)

Is DTC P062F indicated?

YES

If the PCM was updated, substitute a known-good PCM , then recheck. If the PCM was substituted, go to step 1.

Troubleshooting is complete. If the PCM was substituted, replace the original PCM . If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.