| Cannot select ON mode with keyless access and with the keyless remote touching the engine start/stop switch |
Symptom troubleshooting |
|
| Cannot select ON mode with keyless access, but can select ON mode with the keyless remote touching the engine start/stop switch |
Symptom troubleshooting |
|
| Cannot select ON mode with the keyless remote touching the engine start/stop switch, but can select ON mode with keyless access |
Check the keyless access/TPMS control unit |
- Keyless access/TPMS control unit is not registered
- Keyless access/TPMS control unit
- IGN TRX line open/short
- Harness/connections
|
| The mode changes between ACCESSORY and ON, but it does not change to OFF |
- Check the keyless access/TPMS control unit
- Check the TCM
|
- Keyless access/TPMS control unit
- ATP-P line open
- TCM
|
| The mode changes between ACCESSORY and ON, but it is difficult to change to OFF |
- Check the keyless access/TPMS control unit
- Check the gauge control module
- Check the TCM
|
- Gauge control module
- Keyless access/TPMS control unit
- PCM
- B-CAN communication line open/short
- F-CAN communication line open/short
- Speed signal line open
- TCM
|
| Engine start/stop switch does not work |
Check for DTCs. If any DTC is indicated, go to the DTC troubleshooting |
- ACC relay circuit
- Keyless access/TPMS control unit
- Engine start/stop switch
- SS1 (+) line short
- SS2 (-) line short
- Harness
|