Removal and Installation

Glove Box - Remove

Keyless Access/TPMS Control Unit - Remove

Courtesy of HONDA, U.S.A., INC.

1. Disconnect the keyless access/TPMS control unit connectors.

2. Using TORX E8 bit, remove the bolts (A).

3. Remove the keyless access/TPMS control unit (B) and the bracket (C).

Courtesy of HONDA, U.S.A., INC.

4. Remove the keyless access/TPMS control unit (A) from the bracket (B).

All Removed Parts - Install

1. Install the parts in the reverse order of removal.

NOTE:

If the bolt threads of the steering hanger beam are stripped, replace the bolts with one-size larger bolts, which are specifically designed to tighten the instrument panel to the specified torque setting, and provided as service parts.

Keyless Access System - Register

1. After replacement, register the keyless access/TPMS control unit - Refer to: Keyless Access System Registration (2016 2017 2018 2019 2020) , or Keyless Access System Registration (2014 2015) and memorizing the tire pressure sensor ID .

NOTE:

If the original keyless access/TPMS control unit is installed, confirm that all systems work properly.