Driving Position Memory System Description

Overview 

The driving position memory system (DPMS) can store the driver's seat and power mirrors positions to one of two memorized presets. Drivers can activate the system using the driving position memory switch or the remote.

Along with the seat, the power door lock settings will also be memorized based on which remote (Driver 1 or Driver 2) is used.

Memorizing a Seat and Mirror Position 

Turn the vehicle to the ON mode and move the seat and the mirrors to the desired position. Press the SET button on the driving position memory switch. A single beep will be heard and both of the green LEDs will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat and the mirror positions have been memorized. The LED will remain lit, unless the seat and the mirrors are moved from the memorized position.

Memorized Position Recall with the Remotes 

When the driver's door is unlocked and opened, the driver's seat will move back and move to the memorized position once the vehicle is turned to the ON mode. The green LED corresponding to that remote will then turn on and stay lit until the seat position is changed or the vehicle is turned to the OFF (LOCK) mode. The seat will move back when the vehicle is turned to the OFF (LOCK) mode and the driver's door is opened.

Memorized Customized Setting Recall with the Remotes 

The customized setting is controlled independently by the remotes (Driver 1 and Driver 2).

Failsafe Function 

When a failure occurs in the inputs of the power supply and B-CAN signals or an abnormality with the control unit the failsafe function disables the driving position memory system function.