Multi View Camera System (MVCS) Symptom Troubleshooting Index

Symptom	Diagnostic procedure	Also check for
HDS does not communicate with the multi view camera unit	Check for DTCs Check for multi view camera unit 36P connector Check for No. EA fuse Check for No. EE fuse Check for continuity to body ground	Poor connections or loose terminals Blown fuse Open or short circuit between the No. EA fuse and multi view camera unit Open or short circuit between the No. EE fuse and multi view camera unit Poor body ground (G405)
The message "Unable to display camera images" is displayed	Check for DTCs Check for multi view camera unit 36P connector Check for the MVS_CHK line	Poor connections or loose terminals Open or short in the MVS_CHK line
Does not switch to the multi view display	Check for DTCs Check for multi view camera unit 36P connector Check for the multi view camera switch Check for the MVS_GND line	Poor connections or loose terminals Open in the wire harness between the multi view camera unit and multi view camera switch Open in the multi view camera switch ground wire Open or high resistance in the MVS_GND line
When the power mirror switch operate, the display range is displayed in an improper state	Check for DTCs Check for the power mirror switch	Power mirror switch failure Open in the wire harness between the multi view camera unit and power mirror switch
The black screen is appeared on the multi view camera screen, or an image is badly distorted	Check for DTCs Check for multi view camera unit 36P connector Check for the MVS_VID line	Poor connections or loose terminals Open or short circuit in the MVS_VID line