DTC B1036: Inspection

IG1_METER(VST) Circuit Inspection 

Test Procedure 

• Preparation
• 1. -

     Gauge control module connector A (32P): disconnected

• Procedure
• 1. -

     Perform the inspection according to the following table.

			(Disconnected)Gauge control module connector A (32P) female terminals
		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
	IG1_METER(VST) circuit inspection	ON		12 V battery voltage [circuit type 3]

Results 

• If abnormal, there is a problem in the circuit.

  NOTE:  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.