DTC B1038: Notes
DTC B1038 : IMMOBILIZER F-CAN Authentication ID Not Received
NOTICE:
Before you troubleshoot, review the How to Troubleshoot .
NOTE:
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks .
- Refer to the DTC shown on the display, then inspect the connectors and terminals based on the instructions.
- DTC may be stored if transmitting control unit does not start normally.
- DTC may be stored due to the power/ground circuit failure of the transmitting control unit. Before this troubleshooting, check the power/ground circuit of the transmitting control unit first.