DTC B2375: Inspection
Connector Visual Inspection
Test Procedure
- Check for loose or poor connections at the automatic lighting/rain sensor 5P connector.
Results
- If it is abnormal, there is a problem with the connector and terminals.
Automatic Lighting/Rain Sensor Visual Inspection
Test Procedure
- Check for dirt and dust on the surface of the automatic lighting/rain sensor.
Results
- If it is abnormal, clean the surface of the automatic lighting/rain sensor.
Windshield Glass Visual Inspection
Test Procedure
- Check for dirty or damaged on the windshield glass.
Results
- If it is abnormal, clean the windshield and, if necessary, repair or replace the windshield glass.
Automatic Lighting/Rain Sensor Inspection
Test Procedure
- If the other inspection item(s) indicated a normal condition, then it is determined that the remaining automatic lighting/rain sensor is the cause.
Results
- There is a problem with the automatic lighting/rain sensor.