ECT Sensor 2 Inspection
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
Unit output voltage inspection
- Preparation
-
- -
ECT sensor 2 2P connector: disconnected
- -
- Procedure
-
- Turn the vehicle to the ON mode.
- Confirm the HDS [ECT Sensor 2 Voltage].
- Normal Conditions
-
- -
HDS [ECT Sensor 2 Voltage] value is more than 0.08 V .
- -
Results
- If it is normal, there is a problem with ECT sensor 2.
- If it is abnormal, there is a problem with other related components.