Repair Procedure

How to use this service information .

Courtesy of HONDA, U.S.A., INC.

: Torque, N.m (lbf.ft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

: SPL Tool

: Required Removal

*1: M/T

*2: CVT

Courtesy of HONDA, U.S.A., INC.

: Torque, N.m (lbf.ft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

: SPL Tool

: Required Removal

1. A.-

   Figure 1 

   Courtesy of HONDA, U.S.A., INC.

   Key Information 

   Do the following before starting your work.

   Remove: 

   • Engine Undercover - Refer to: Undercover Area (Type-S) (2024 2025) or Undercover Area (Except Type-S)

   Sub-Procedure 

   ■ Removal/Installation 

   NOTICE:  Do not bend the flex tube (a) of exhaust pipe A excessively. (Figure 1)

   Figure 2 

   Courtesy of HONDA, U.S.A., INC.

   ■ Installation 

   • When replacing exhaust pipe A, remove the protector (b) from the new exhaust pipe A after installation. (Figure 2)
2. B.-

   Sub-Procedure 

   ■ Installation 

   • Refer to the figure.

   Installation Directions 

   Position	Direction
   a	Up

   Courtesy of HONDA, U.S.A., INC.

3. C.-

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   ■ Installation 

   • Refer to the figure.

   Installation Directions 

   Position	Direction
   a	Up

4. D.-

   Sub-Procedure 

   ■ Installation 

   • Installing the fuel tank heat baffle in the following procedure.

   Installation Directions 

   Position	Direction
   a	Front

   Tightening Procedure 

   Step	Operation	Object	Detail
   1	Temporarily Tighten		-
   2	Tighten	All Bolts	-> -> ->

   Courtesy of HONDA, U.S.A., INC.

5. E.-

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   ■ Installation 

   • Refer to the figure.

   Installation Directions 

   Position	Direction
   a	Up