CSS_SIG1, CSS_SIG2, Shorted Wire Inspection
Test Procedure
- Preparation
-
- -
VSA modulator-control unit connector (46P): disconnected
- -
Clutch pedal stroke sensor connector (4P): disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected) VSA modulator-control unit connector (46P) female terminals
IG Mode
Normal Conditions
CSS_SIG1, CSS_SIG2 shorted wire to wire inspection
OFF
There is more than 1 MΩ
Results
- If abnormal, there is a problem in the circuit.