LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2023 >> Integra Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Diagnostics >> DTC Troubleshooting >> DTC Troubleshooting: P1845 >> Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Confirmation Procedure

1. Raise the vehicle on a lift. Make sure it is securely supported, and allow all four wheels to rotate freely.

2. Start the engine, disable the VSA - Refer to: How to Troubleshoot the Fuel and Emissions Systems (1.5L Engine) or How to Troubleshoot the Brake Booster Pressure Monitoring System or How to Troubleshoot the Fuel and Emissions Systems (2.0L Engine) (2024 2025) or How to Troubleshoot the CVT System

3. Run the vehicle in R position/mode at speeds over 19 mph (30 km/h) for at least 5 seconds.

4. Confirm the HDS [Direction of Drive Pulley Rotation], and if any value other than "Reverse" is displayed, the failure is duplicated.

scientia non olet · About LEMON Manuals