Electric Window System Initialization

ELECTRIC WINDOW SYSTEM INITIALIZATION 

For versions/markets where provided, after a break in power supply for the control units (battery replaced or disconnected or protective fuses for the electric window control units replaced), the automatic operation of the windows must be restored.

The restoration procedure must be performed as described below with the doors closed:

1. completely open the driver's door window keeping the operating button pressed for at least 3 seconds once the (lower) end of travel position has been reached;
2. completely raise the driver's door window keeping the operating button pressed for at least 3 seconds once the (upper) end of travel position has been reached;
3. completely raise the driver's door window keeping the operating button pressed for at least 3 seconds once the (upper) end of travel position has been reached;
4. proceed in the same way as described in points 1 and 2 for the passenger side door;
5. make sure that the initialization is correct by checking that the windows work automatically.

The initialization cycle is complete.