LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> American Motors >> 1985 >> Alliance Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 1.4L >> Testing >> Sensor Insulation Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Insulation Check

  1. Disconnect 3-pin connector. See Figure. Turn ignition switch off. Connect ohmmeter leads to terminals "A" and "C".
  2. An infinite reading should be indicated. If so, proceed to next check. If not, replace magnetic position sensor.
NOTE: In case of infinite readings, be sure that the ohmmeter probe is properly inserted to touch bottom of terminal.
scientia non olet · About LEMON Manuals