Removal, 100: Notes

Remove lower instrument panel trim from around steering column. Pry off steering wheel pad. Unscrew steering wheel mounting nut and remove steering wheel. Unscrew and remove horn slip ring, column casing, and horn ground contact. Pull three washers from top of steering column. Detach electrical leads from column switches; remove switches.
Loosen support bolt from bracket below instrument panel. Note position of plastic slide pieces. In engine compartment, detach lower end of steering column from pinion shaft by removing pinch bolt.
Dislodge rubber grommet from around column in firewall. Lift column assembly out of vehicle.
CAUTION: This is a telescopic safety steering column and must be handled with care to prevent accidental collapsing of column.