October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Cold Acceleration Enrichment
- Disconnect differential pressure regulator connector from side of regulator. Using Adapter (1315 A/1
), connect Multimeter (US 1119
) to differential pressure regulator and to the connector removed from the regulator.
NOTE:
Coolant temperature must be below 104°F (40°C) to perform Cold Acceleration Test.
- Set multimeter to 200Ma DC scale. Disconnect oxygen sensor connector. Start engine and let idle. Note multimeter reading. Accelerate engine. Multimeter reading should increase approximately 6Ma during acceleration.