LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1996 >> A4 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position (CMP) Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position (CMP) Sensor: Removal

CMP sensor, is located on rear of left cylinder head. Disconnect negative battery terminal. Remove mounting bolts and sensor. To replace oil seal, remove CMP sensor mounting plate. Install Seal Extractor Holder (2085/1) and Seal Extractor (3240). Remove seal.

scientia non olet · About LEMON Manuals