Code Control Module (function 07): Notes

NOTE: Each time after coding the control head, basic setting must be performed. See Basic Setting (function 04) .

Connect VAG 1551 Scan Tool, insert address word 08 "AC/Heating Electronics" and move forward in the program until "Select function XX" is displayed. See VAG 1551 ((VAG 1552) SCAN TOOL (ST), CONNECTING AND SELECTING FUNCTIONS .
Switch printer on by pressing the PRINT button (indicator lamp in the button comes on).

Indicated on display (function selection):

Fig 1: Scan Tool display - Code Control Module (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: Scan Tool display - Code Control Module (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

The following readout is displayed:

Fig 3: Scan Tool display - Code Control Module (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

NOTE:

The program can be moved forward to the next position by pressing the --> button.
Depending on the card version, the 1st and 2nd digits on VAG 1551 may not be displayed (readout e.g. 182 instead of 00182).