LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2000 >> A6 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft & Power Door Lock Systems >> Self-Diagnostic System >> Function Mode 07: Code Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Mode 07: Code Control Module

  1. Central locking system can be coded according to possible function/equipment variations. Optional coding enables vehicle to automatically lock doors when vehicle reaches speed greater than 10 MPH (15 km/h). Interior monitoring system can be coded to either a sedan or station wagon. If scan tool displays incorrect coding or a new central locking control module is being replaced, go to next step.
  2. When RAPID DATA TRANSFER SELECT FUNCTION XX is displayed, press 0 then 7 (07). RAPID DATA TRANSFER 07-CODE CONTROL MODULE will be displayed. Press "Q" key to confirm input.
  3. CODE CONTROL MODULE ENTER CODE NUMBER XXXXX (0-32000) will be displayed. For central locking system, enter 15885 (standard coding) or 15917 (optional coding) using numeric key pad of scan tool. For ultrasonic interior monitoring for anti-theft system, enter either 00001 (sedan) or 00002 (station wagon). Press "Q" key to confirm input. Press right arrow key to return to select function display. Exit on-board diagnostics, see FUNCTION MODE 06: EXITING ON-BOARD DIAGNOSTICS  .
scientia non olet · About LEMON Manuals