LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2000 >> TT Base, 1.8 C >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Automatic A/C-Heater System >> Programming >> A/C-Heater Control Panel Coding
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C-Heater Control Panel Coding

NOTE: Basic setting procedure must be performed each time A/C-heater control panel is coded. See BASIC SETTING  . Verify engine and A/C compressor type, code A/C-heater control panel and perform basic setting. Always verify coding of removed and replacement A/C-heater control panel.

Ensure scan tool is in A/C HEATING ELECTRONICS function. With RAPID DATA TRANSFER displayed on scan tool, press "0" and "7" buttons to select CODE CONTROL UNIT function. Press "Q" button to confirm input. Press right arrow button. Enter code "00 140" for USA, 4-cylinder, left hand drive, gas engine. Press "Q" button to enter input. Perform BASIC SETTING.

scientia non olet · About LEMON Manuals