LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2003 >> A4 Base, 2D Convertible, 1.8 C >> Repair and Diagnosis >> Engine Performance >> System >> 1.8L - Turbo Engine Controls - Generic Scan Tool, Engine Code(S): AMB >> 28 - Ignition/Glow plug System >> Ignition, servicing >> General notes on ignition system
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General notes on ignition system

For all Ignition/Glow plug system component locations. Refer to โ†’ 28 IGNITION/GLOW PLUG SYSTEM

For all Ignition/Glow plug system removal/installation procedures and torque specifications. Refer to โ†’ 28 IGNITION/GLOW PLUG SYSTEM

Check the Technical Bulletins for information that may supersede any information included in this article.

NOTE:
  • All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through Audi.
  • Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
  • The manufacturers test box Test Box 105 Pin VAG1598/31 is available for purchase or rental.