Section 32 (4.2L V8 5V (Engine Code: BAS)
WARNING: This page is about a different car, the 2005 Audi allroad, 2004 Audi allroad, and 2003 Audi allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Technical data
- Engine - Assembly
- Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Dual-mass flywheel or drive plate, overview
- Timing chains, covers
- Camshaft drive
- Power take-off
- Engine Cylinder Head Valvetrain
- Cylinder head, removing and installing
- Intake manifold, overview
- Valve gear, servicing
- Notes
- Valve gear, overview
- Camshafts, removing and installing
- Axial clearance of camshafts, checking
- Roller-type rocker finger, removing and installing
- Valve stem seals, replacing
- Valve guides, checking
- Valves, checking
- Valve seats, reworking
- Camshaft timing control, checking
- System test, performing
- Camshaft adjustment solenoid valves, checking
- Engine - Lubrication
- Lubrication system components, removing and installing
- Notes
- Oil pump and lower part of sump, overview
- Lower part of sump, removing and installing
- Oil pump, removing and installing
- Upper part of sump, overview
- Upper part of sump, removing and installing
- Oil retention valves and spray jet valve, overview
- Oil retention valves and spray jet valve, removing and installing
- Oil filter housing, overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing