Code Control Module (scan tool function 07): Notes
Coding the ESP control module adapts the control module to the vehicle.
New control modules from the parts distribution center are un-coded and must be coded after being installed.
Coding is only possible if a dealership number is stored in the VAG1551 scan tool.
Before the control module can be coded, "Login Procedure" function 11 must have been successfully carried out using the VAG1551/1552 scan tool. See LOGIN PROCEDURE (SCAN TOOL FUNCTION 11) .
After the control module is coded, the steering angle sensor -G85- must be zeroed without leaving "Basic Setting" function 04, display group 001. See BASIC SETTING (SCAN TOOL FUNCTION 04) .
NOTE:
If the control module is coded with code 00000 or with a code that does not match the vehicle, the ABS warning light -K47- and the traction control indicator light -K86- light continuously, and the DTC01044 - "Control module incorrectly coded" is stored in the DTC memory of the control module.