TID $05 (05): Tank Ventilation System, Tank Vent Valve Function
- Connect the scan tool.
- Start the engine and run at idle.
- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID 05($05)".
- Select the desired "Component-ID (CID)" or "Hex-ID".
- Check specified values at idle.
| Component-ID (CID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 04 ($04) | No DTC | Tank Ventilation Valve Check. | 5-10% | --- | --- |
| 05 ($05) | No DTC | Tank Ventilation Valve Check. | 5-10% | --- | --- |
| 06 ($06) | No DTC | Tank Ventilation Valve Check. | 5-10% | --- | --- |
| 07 ($07) | P0441 | Fuel Tank Leak Test. | 5.5% | > 9.4 % | Refer to DTC P0441 in the OBD DTC Summary Table. P0441 . |
- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTCs or the corresponding diagnostic repair procedure → Mode 03: Interrogating fault memory .
- Switch the ignition off.
- End of diagnosis.