Read Measuring Value Block (function 08): Notes
- Initiate On Board Diagnostic (OBD) of immobilizer. Refer to Anti-theft immobilizer On Board Diagnostic (OBD), initiating .
Display on VAS 5051/5052:
- Select diagnostic function "08 - read measured value block" in selection -1-.
Display on VAS 5051/5052:
1 - Enter display group Max. input value = 255
- Enter desired display group number in button field -2-. Refer to table → Read Measuring Value Block (function 08) .
Interpreting displayed information. Refer to Read Measuring Value Block (function 08) .
Display on VAS 5051/5052:
1 - Display group X
2 - Display field 1
Display field 2
Display field 3
Display field 4
NOTE:
- If no display follows, a display field is not assigned.
- To switch to a different display group, proceed as follows:
| Display group | VAS 5051/5052 tester |
| higher | Press s button. |
| Lower | Press t button. |
- Press "08 - Erase DTC Memory" to end function ← -button.