Code Control Module (function 07)
NOTE:
"Code Control Module" function 07 is used to program the automatic vertical headlight aim control system control module for:
- Vehicle type
- Drive layout
During coding, option combination possibilities are set.
Coding, initiating
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.
| Code Control Module Q Input code number XXXXX (0-32000) |
Indicated on display:
- Input code number as shown in code table. Refer to Code Control Module (function 07) .
Example: 00009
Coding table
| Code | Vehicle type/drive layout | ||
| 0009 | TT front-wheel drive | ||
| 0010 | TT all-wheel drive | ||
| Code Control Module Q Input code number 00009 (0-32000) |
Indicated on display (example only):
- Press -Q- button to confirm input.
| 4B0907357Vertical Aim Control D003 → Coding 00009 WSC 06812 |
Indicated on display: (after about 5 seconds)
- Press → button to complete coding.
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -0- and -6- to select "End Output" function 06.
| Rapid data transfer Q 06 - End Output |
Indicated on display:
- Press -Q- button to confirm input.