Diagnostic Trouble Code (DTC) Memory, erasing (function 05)
NOTE:
If DTC memory cannot be erased, check DTC memory again and repair any malfunctions.
Test requirements
- DTC memory checked. Refer to Diagnostic Trouble Code (DTC) Memory, checking (function 02)
- All malfunctions repaired
After successfully checking DTC memory:
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
| Rapid data transfer Q 05 - Erase DTC Memory |
Indicated on display:
- Press -Q- button to confirm input.
| Rapid data transfer " DTC Memory is erased |
Indicated on display:
DTC memory is erased.
- Press → button.
| Rapid data transfer HELP Select function XX |
Indicated on display:
NOTE:
- If this display appears as shown, the test sequence was incorrect.
- If this display appears as shown, the test sequence was incorrect.
Follow the sequence of operations precisely, first read DTC memory, repair any malfunctions (if necessary) then erase DTC memory.