Code Control Module (function 07)

This function can be used to code the instrument cluster for the following features:

NOTE:

The coding procedure is used to set the appropriate configuration for the on-board computer and check the system according to the equipment installed, the export version, the number of cylinders and the engine type.
The coding table only gives the coding combinations that are possible for the Audi TT.

Coding procedure

Rapid data transfer HELP
Select function XX

Indicated on display:

Code Control Module
Enter code number XXXXX (0-32000)

Indicated on display:

NOTE:

Coding is entered for various combinations of optional equipment, according to equipment level.
If the vehicle is equipped with more than one item of optional equipment which needs to be coded, enter the sum total of the respective coding numbers.

Enter code number according to coding table. Refer to Code Control Module (function 07) . Example: 06244

06				Seatbelt warning (02) plus washer fluid warning active (04) equals 06
	2			USA
		4		4 cylinders
			4	Turbo engine

Coding table

XX				Optional equipment
00 01 02 04				No optional equipment Larger fuel tank capacity (quattro) Seat belt warning system active Washer fluid warning system active
	X			Country (export version)
	2 3			USA (US) Canada (CDN)
		X		Number of cylinders
		4		4 cylinders
			X	Type of engine
			4	Turbo engine

Code Control Module Q
Enter code number 06244 (0-32000)

Indicated on display (example only):

8N1919930 KOMBIINSTR.+IMM M73 D15 →
Coding 06244 WSC 06812

After about 5 seconds this display will appear:

Rapid data transfer HELP
Select function XX

Indicated on display: