Output Diagnostic Test Mode Test Notes
- The vehicle must be raised until wheels are free to turn (2nd technician required).
- Output Diagnostic Test Mode (DTM) is possible after ignition is switched on or after engine is started.
- For safety reasons, output DTM function is automatically terminated at 19 MPH (30 KM/H).
- When using VAS5051, test sequence can always be exited via the "C" button.
- To select other functions, see SELECTABLE FUNCTIONS (FUNCTION MODE) table. Ignition must be switched off and on again after output DTM, then select address word 22 - ALL WHEEL DRIVE ELECTRONICS again.