LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2004 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 1.8L - Turbo Generic Scan Tool Engine Code(S): Amu, BEA, ATC, AWP >> 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body >> Multi-Function Transmission Range (TR) Switch -F125- >> Multi-Function Transmission Range (TR) Switch F125 , removing and installing >> Multi-Function Transmission Range (TR) Switch, installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Function Transmission Range (TR) Switch, installing

Installation is performed in reverse order. When doing this note the following:

Nut tightening torque: 7 Nm.

Fig 1: Multi-Function TR Switch, Circlips, Bolts, Nuts And Washers
GW00015832Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • If one or more hooks on lock washer are broken during bending, these must be replaced.
Fig 2: Lever/Selector Shaft And Bolts
GW00015831Courtesy of VOLKSWAGEN UNITED STATES, INC.

Nut - 3  - tightening torque: 12.5 Nm.

NOTE:
  • Transmission must remain in "N" , shift back to "N" if necessary.
Fig 3: Pressing Selector Lever Cable Off Lever/Selector Shaft Using Screwdriver
GW00015822Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Under some circumstances, you will have to switch the lever/selector shaft to the correct position in order to press selector lever cable on.
Fig 4: Air Filter Housing, MAF Sensor, And Retainers
GW00015830Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals