Code Control Module (function 07)
- Connect the vehicle diagnostic, testing and information system VAS 5051. Refer to Vehicle diagnostic, testing and information system VAS 5051, connecting and selecting functions , and select the vehicle system "01 - Engine electronics" from the menu. When doing this the ignition must be on.
Display on VAS 5051:
- Select diagnosis function "07 - Code control module" from the menu -1-.
Display on VAS 5051:
1 - Enter code word
(figures up to 32767)
- Using the keypad -2-, enter the correct control module coding as shown in the coding table. Refer to Coding table .
Meaning of coding:
| XX | Country/emissions | |||
| X | Drive layout/additional functions | |||
| X | Gearbox | |||
| X | Model |
| Example of coding | |
| 07700 | USA LEV 1) (exhaust emissions standard), all wheel drive with traction control (ASR)/ESP 2), 5-speed manual gearbox, Audi TT |
1) LEV: abbreviation for low emissions vehicle
2) ASR: abbreviation for anti-slip regulation
- Confirm input with Q button
Display on VAS 5051:
1 - Coding is being performed.
- Wait until the next display appears.
Fig 4: Diagnostic System VAS 5051: Display - (Coding Of Vehicle System Performed & Control Module Identification With New Coding)
Display on VAS 5051:
1 - Coding of vehicle system performed
2 - Control module identification with new coding
(previous coding in brackets)
- Press the ← button to exit from the diagnosis function "07 - Code control module"