Selector lever cable, checking and adjusting: Adjusting

• Place selector lever in "P" position.

Fig 1: Identifying Selector Lever Cable At Transmission Side

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Loosen screw - 2  - on front ball socket of selector lever cable - 1  -.
• Place lever/selector shaft - 3  - at transmission in "P". Stop lever must engage in park locking wheel, both front wheels are blocked (cannot be turned together in any direction).
• Tighten screws - 2  - (13 Nm).
• Shift mechanism, checking → Shift mechanism, checking