Check wire connections to TCM.: Notes
- Connect test box to TCM wiring harness → Test box, connecting for wiring test .
- Check wire connections between test box and 10-pin connector to TCM for open circuit, according to wiring diagram.
Wire resistance: max. 1.5 Ω
- Also check wires for short circuit to each other.
Specification: ∞ Ω
If no malfunction is found in wires:
- Check Multi-Function Transmission Range (TR) Switch -F125- adjustment → Multi-Function Transmission Range (TR) Switch -F125-, adjusting .
- Check selector lever cable adjustment → Selector lever cable, checking and adjusting .