Check Control Module Versions (function 01)

• Connect the VAG1551 Scan Tool (ST) and select the address word 03 "Brake Electronics". Refer to VAG1551 Scan Tool (ST), connecting and selecting functions .
• Advance through program sequence by pressing → button.

Rapid data transfer HELP Select function XX

Indicated on display:

• Press buttons -0- and -1- to select "Check control module version" function 01.

Rapid data transfer Q 01 - Check Control Module Versions

Indicated on display:

• Confirm input using the -Q- button.

8N0907379 A ABS/EDS 20 IE CAN 0001 → Coding 13504 WSC XXXXX

Indicated on display:

Indicated: 

• The control module identification number, e.g. 8N0 907 379 A

Application of the control module

• The system indication, e.g. ABS/EDL 20 IE or ASR 20 IE
• Data-BUS equipped (CAN).
• Hard and software version, e.g. 0001
• The code no. of the control module, e.g. 13504, control module, coding. Refer to Code Control Module (function 07) 

• The workshop code (WSC XXXXX)

Refer to Operating instructions for Scan Tool (ST)

The workshop code, WSC XXXXX, indicates the workshop where the control module was last coded.

After pressing the → button, the VAG1551 program returns to the initial screen.

• End Output (function 06). Refer to Ending Output (function 06) .
• Switch off ignition and disconnect diagnostic connector.