Diagnostic mode 9: Vehicle information
In this diagnostic mode, vehicle specific diagnostic data such as e.g. the control module versions will be displayed.
Test requirement
- No DTCs in the DTC memory. → Diagnostic Mode 3: Interrogating DTC memory .
Procedure
- Connect diagnostic tester. → Diagnostic tester, connecting .
- Switch ignition on.
- In diagnostic function "address word 33 - OBD" select "Mode 9: Vehicle information".
- Select desired vehicle information "Test-ID XX".
| Test-ID | Diagnostic text |
|---|---|
| 02: | Vehicle identification number e.g. |
|
|
| 04: | Calibration identification e.g. |
|
|
|
|
| 06: | CVN (check sum) e.g. |
|
|
|
- End diagnosis and switch ignition off.