Test-ID 162: Mis-Fire Cylinder 1 Data
- Connect diagnostic tester. → Diagnostic tester, connecting .
- Start engine and let run at idle speed.
- In diagnostic function "address word 33 - OBD" select "Mode 6: Check test results of components that are not continuously monitored".
Select "Test-ID 162".
- Select desired "Component-ID".
- Check specified values at idle.
| Test-ID | Min. | Max. | Specified Value | ||
|---|---|---|---|---|---|
| 11 | Mis-Fire Cylinder 1 Data | 0 counts | 65535 counts | 0 counts | |
| 12 | Mis-Fire Cylinder 1 Data | 0 counts | 65535 counts | 0 counts | |
- End diagnosis and switch ignition off.
If any of the specified values are not obtained:
- Check Fuel injectors → Fuel Injectors, checking .
- Check Ignition Coil with Power Output Stage → Ignition Coil with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326, checking .