Language versions for multi-function display, adapting

NOTE: Adaptation is only possible on vehicles with on-board computer.

Rapid data transfer HELP
Select function XX

Indicated on display:

Adaptation
Enter channel number XX

Indicated on display:

Channel 4 Adaptation 1 →
< - 1 3- >

Indicated on display:

NOTE:

The display will show only the last digit of the 5-figure language version code (e.g. 1 for German).
If an incorrect value is entered the adaptation function will be terminated and must be re-started by selecting function 10 (Adaptation) again.
The code can now be entered either directly or in stages via the button pad on the scan tool.

Coding table

Entering code in stages:

Key 1 can be used to change down to a lower code value, and button 3 can be used to change up to a higher code value (for example, to change to "2" for English).

Channel 4 Adaptation 2 Q
< - 1 3- >

Indicated on display (example only):

Channel 4 Adaptation 2 Q
Store changed value?

Indicated on display:

Channel 4 Adaptation 2 →
Changed value is stored

Indicated on display:

Direct input:

Channel 4 Adaptation 1 →
< - 1 3- >

Indicated on display:

Channel 4 Adaptation 1
Enter adaptation value XXXXX

Indicated on display:

Enter the required 5-figure code (Refer to Adaptation (function 10) ) via button pad.

Example:

Channel 4 Adaptation 1 Q
Enter adaptation value 00002

Indicated on display (example only):

Channel 4 Adaptation 2 Q
< - 1 3- >

Indicated on display (example only):

Channel 4 Adaptation 2 Q
Store changed value?

Indicated on display:

Channel 4 Adaptation 2 →
Changed value is stored

Indicated on display: