TID 03 ($03): Secondary Air Injection (AIR) System
- Connect the scan tool.
- Start the engine and run at idle.
- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID 03 ($03) ".
- Select the desired "Component-ID (CID)" or "Hex-ID".
- Check specified values at idle.
| Component-ID (CID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 01 ($01) | P0411 | Secondary Air Injection (AIR) System test. | --- | 18% | Refer to DTC P0411 in the OBD DTC Summary Table for all monitoring values. P0411 . |
| 02 ($02) | P0411 | Secondary Air Injection (AIR) System test. | --- | 18% | Refer to DTC P0411 in the OBD DTC Summary Table for all monitoring values. P0411 . |
| 09 ($09) | P0411 | Secondary Air Injection (AIR) System test. | --- | 18% | Refer to DTC P0411 in the OBD DTC Summary Table for all monitoring values. P0411 . |
- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTCs or the corresponding diagnostic repair procedure → Mode 03: Interrogating fault memory .
- Switch the ignition off.
- End of diagnosis.