Multi-function steering wheel with two blocks of buttons
WARNING: This page is about a different variant/trim than selected.
Removing
- In vehicles with Telematics, activate Telephone/Telematics Control Module J526 → Service mode, activating/deactivating service mode.
- Disconnect battery ground wire → - 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL .
- Follow safety precautions for airbag systems → - 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS .
- Remove drivers airbag → - 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS .
- Disconnect electrical connection - 2 -.
- Remove screws - 1 - and - 3 - (1 Nm).
- Remove switch unit - 4 - in direction of arrow from airbag unit.
Installing
- Install in reverse order.
- Ensure all connections have engaged and lines lie in proper guides.