April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Selector Switch II E272 , removing and installing

WARNING: This page is about a different variant/trim than selected.

Turn off all electrical components.
Remove ignition key.

Removing

Fig 1: Identifying Cigarette Lighter Cover And Function Selector Switch II E272

GW00021472

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Open cigarette lighter cover - 2 -.
Press Function Selector Switch II E272 - 1 - out of installation opening from below as shown in illustration.
Disconnect connector at Function Selector Switch II E272.

Installing

Install in reverse order.